







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Spring Valley Homeowners Choose Toto Construction
Construction Spring Valley provides independent Toto construction and repair service in Spring Valley, NV, covering the Toto toilets and Washlet units that dominate bathrooms in this part of the valley. We’re an independent shop with no dealer tie, so our diagnosis starts with the failed part, not with a full replacement. Our technicians have up to 12 years of experience, and they know the Toto parts ecosystem well enough to match OEM fill valves, flappers, and gaskets to the exact series in your bathroom. That means evaluating a running Drake or a leaking Aquia as the specific problem it is, rather than recommending a whole new toilet as a first move.
Spring Valley sits in unincorporated Clark County, and most of the homes here went up during the 1990s and 2000s boom on former desert scrub west of the Strip. The bathrooms in those stucco tract homes now have fixtures approaching 20 to 35 years old, and a lot of them are Toto. We handle the repair and the remodel that surrounds it, from vanity replacement to a walk-in shower build, so the toilet work and the tile work don’t have to come from two different contractors. Call (844) 560-4461 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Spring Valley for Your Toto Construction?

Toilet repair looks simple until you’re staring at a fill valve that almost fits. Toto models use specific assemblies, and the difference between a correct OEM part and a universal kit shows up months later as a slow leak, a weak flush, or a refill tube that keeps siphoning. Our technicians have pulled the lid on enough Drakes, Eco Ultramax units, Aquia dual-flush models, and Washlet seats to recognize the pattern before the tank comes apart.
On a Toto, the repair is usually the right call. Porcelain holds up. A cracked tank or a damaged bowl trapway is a replacement; almost everything else is a serviceable assembly. We choose parts that fit your model series exactly and we test the refill level, the flapper seal, and the fill valve shutoff before we consider the job done. That approach keeps your warranty position intact because we’re working on the fixture, not modifying it. It also means we tell you honestly when a repair is the answer, even when a new toilet would be the easier sale. Call (844) 560-4461 for a free estimate and we’ll put the options in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Spring Valley
These are the failure modes we see most often on Toto fixtures in Spring Valley homes, and the reason each one happens:
- Weak refill or constant running (fill valve). The fill valve diaphragm on a TSU30A or TSU10A wears out from years of mineral-heavy water and heat cycling. When it stiffens, the valve can’t shut off cleanly, so the tank refills slowly or keeps trickling after the flush. The fix is a diaphragm replacement or a new OEM valve for the right series, not a whole new toilet.
- Phantom flushing and a rising water bill (flapper). The flapper on a THU175S or THU331S curls at the edge over time, and a curled edge won’t seal against the flush valve seat. Water leaks from the tank into the bowl overnight, the fill valve kicks in to replace it, and you hear a flush that nobody made. That’s the classic cause of a bill that climbs with no visible leak.
- Washlet seat sensor or wand motor failure. After years of exposure to hard water and desert dust, a Washlet wand motor can stall or a seat sensor can stop registering. Owners often assume the whole unit is dead. Usually it’s one component, and the unit is worth diagnosing before it’s written off.
- Slow seep at the toilet base (tank-to-bowl gasket). The THU002 or THU008 gasket hardens with age and stops sealing between tank and bowl. Water seeps down the outside of the bowl and pools at the base, where it looks like a floor or wax ring problem. Replacing the correct Toto gasket solves it; a generic gasket often doesn’t seat right.
- Caliche-driven rough-in problems on a bathroom build. When a remodel moves the toilet or adds a walk-in shower, the drain line has to go through caliche, the cemented desert hardpan just below the surface. That hardpan stops trenchers and augers, so a rough-in bid hinges on how much of it the crew hits. Getting the fixture placement right up front avoids tearing out new tile later.
Here’s how a typical job usually goes: a Toto Drake that runs intermittently or shows a faint ripple in the bowl is usually a fill valve diaphragm or a flapper that no longer seals. A qualified pro pulls the model number from the tank lid, replaces the OEM valve and flapper, and checks the refill tube height. If the leak is at the base, the tank-to-bowl gasket is the suspect and is replaced with the correct Toto part rather than a generic one. Call (844) 560-4461 if you’re hearing water move when nobody’s in the bathroom.
Toto Parts & Our Repair-vs-Replace Approach

The right part for a Toto is the OEM part built for that model series. We use OEM Toto fill valves, flappers, and gaskets matched to the exact series, because aftermarket “universal” kits fit poorly and tend to produce recurring leaks. That’s the difference between a repair that holds and a callback six weeks later.
We don’t stock or sell Toto parts as a supplier, and we’re not a Toto dealer. We source what fits and we install it. On the repair-vs-replace question, our rule is simple: a Toto with intact porcelain is almost always worth repairing. A full replacement only makes sense when the tank or bowl is cracked, the trapway is damaged, or the fixture is being replaced anyway as part of a bathroom remodel. Our technicians have up to 12 years of experience, so they know when a fixture has life left and when it doesn’t.
Repairing a Toto costs far less than a replacement, and it keeps a fixture you already know. Call (844) 560-4461 for a free estimate and we’ll tell you which way it goes.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start by identifying the exact Toto model, usually from the stamp inside the tank lid, then trace the symptom to its cause: fill valve, flapper, gasket, or a Washlet component. A faint ripple in the bowl, a running tank, or water at the base each points somewhere specific.
- 2
Repair or install. We replace the failed part with the OEM-compatible assembly for that series, or install a new Toto fixture if the porcelain is out of commission. If the toilet comes out as part of a bathroom remodel, the rough-in and supply line get set to the new fixture before tile goes down.
- 3
Test. We fill the tank, flush several times, watch the shutoff, check the refill tube height, and confirm no seep at the base. A toilet that passes has to pass cold, not just once. For a Washlet, we run the wand and seat through a full cycle.
- 4
Warranty. We go over what was replaced, how to spot a recurrence, and what our workmanship warranty covers. Any manufacturer warranty on the fixture stays with you because the installation and repair were done to spec.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Spring Valley
We service and install Toto toilets across the model lines Spring Valley owners actually have: the Drake and Drake II, the Eco Ultramax one-piece, the Aquia dual-flush, and the Washlet bidet seats. That covers standard two-piece fixtures, one-piece units, dual-flush models, and the electronic seats that sit on top of them. For remodels, we also install new Toto fixtures alongside the vanity and shower work, so your bathroom finishes as one coordinated space rather than three separate projects. We don’t stock Toto inventory as a supplier. We service what’s in your bathroom and install what the job calls for, with the correct parts on hand when we arrive. Call (844) 560-4461 and tell us what your fixture is doing.
We Also Service These Brands
Construction Spring Valley works across a catalog of more than 50 material brands, so we’re not limited to one manufacturer. Alongside Toto, our bathroom and kitchen scopes draw on Kohler for fixtures, KraftMaid for cabinetry, GAF for roofing systems, and PGT for impact-rated windows and doors. If your home mixes brands across scopes, one contractor can carry the whole project. Call (844) 560-4461 for a free estimate.
FAQs – Toto Construction Service in Spring Valley

No. We’re an independent Toto service provider, not a Toto dealer and not an authorized or certified representative of the manufacturer, and we have no affiliation with Toto. We work on the brand and install it like any competent independent shop would. That independence is why we can diagnose the real failed part instead of defaulting to a full replacement.
Yes. We use OEM Toto fill valves, flappers, and gaskets matched to the exact model series, because universal aftermarket kits fit poorly and cause recurring leaks. If you want the details on what a specific repair takes, call (844) 560-4461 and we’ll walk you through it.
Most Toto toilet repairs are a short job, often done same-day, since the parts are small and the work is contained. A Washlet diagnosis or a bathroom remodel that involves a new fixture takes longer because the scope is bigger. Call (844) 560-4461 and we’ll give you a realistic window in your free estimate.
We cover Toto toilets (Drake, Eco Ultramax, Aquia dual-flush), Washlet bidet seats, and the installations that surround them: small bathroom remodels, walk-in shower installations, and bathroom vanity installations. If your fixture isn’t listed, call (844) 560-4461 and we’ll tell you whether it’s in our scope.
No. Replacing a failed part with the correct OEM part for your model series and installing to spec keeps your fixture’s warranty position intact. Where the manufacturer covers a fixture defect, that warranty stays with you. We can also work with your insurer where a claim is involved, and we’ll be clear about who warrants what.
Either. A fill valve with a worn TSU30A diaphragm runs weak or won’t shut off; a flapper like the THU175S that has curled won’t seal and leaks from tank to bowl, which triggers the refill. A pro pulls the model from the tank lid, checks both, and replaces the failing assembly. Call (844) 560-4461 for a free estimate.
Often yes. A stalled wand motor or an unresponsive seat sensor from hard-water buildup is a component failure, not necessarily a dead unit. Diagnosis tells you whether the piece is serviceable. Call (844) 560-4461 and we’ll take a look before you buy a new seat.
Not always. A slow seep at the base is frequently the tank-to-bowl gasket, and that’s replaced with the toilet in place. If the leak traces to a failed wax ring or a cracked bowl, the fixture does come out. Call (844) 560-4461 so we can pin it down. Typical repair ranges run $400 – $1,800 depending on the cause.
We use OEM Toto fill valves, flappers, and gaskets matched to your model series. Universal aftermarket kits are the leading cause of recurring toilet leaks, so we avoid them. The correct part fits, seals, and holds. Call (844) 560-4461 for a written line-item estimate with the parts spelled out.
On a Toto, repair is usually the better call even at 15+ years. Porcelain doesn’t age out the way rubber parts do, so a fresh fill valve, flapper, and gasket can put another long stretch of service on the fixture. Replace only if the tank or bowl is cracked. Call (844) 560-4461 for a free estimate and we’ll give you both numbers so you can compare.
It depends on scope. A Toto toilet repair typically runs $400 – $1,800, and the bathroom work around it has its own ranges. Here are the typical estimated ranges for the scopes this page covers:
| Service | Typical Estimated Range |
|---|---|
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
These are estimates for planning, not final numbers. The written line-item estimate sets the final price, with fixed pricing and no change orders. Call (844) 560-4461 for an exact quote. Estimates are free.
Book Your Toto Service in Spring Valley, NV
Whether your Drake is running at night, your Aquia is seeping at the base, or a Washlet has gone quiet, we can diagnose it and get it working. We handle the repair and the remodel around it, from vanity installation to a new walk-in shower, so one contractor carries the project. Call (844) 560-4461 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Spring Valley.












