







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Spring Valley Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Spring Valley, NV. That means cabinet installation and refacing, kitchen design and layout, and cabinets and countertops for owners of KraftMaid’s semi-custom lines – especially the Vantage and Passage series. What sets our KraftMaid work apart is that we know where these cabinets fail in a desert house and how to correct it.
To be clear about the relationship: we are an independent KraftMaid service provider. We are not authorized, sponsored or endorsed by KraftMaid. We work on their cabinetry constantly, and we don’t pretend otherwise. If you’ve got a KraftMaid kitchen in Spring Valley that needs leveling, re-fronting, hinge replacement or a fresh layout, call (844) 560-4461.
Why Trust Construction Spring Valley for Your KraftMaid Construction?

KraftMaid is a semi-custom line. That word matters. It means the box build, the door and drawer front spec, and how a run of cabinets is leveled and shimmed to real-world walls all come down to the installer. A semi-custom cabinet that’s hung out of plumb will rub, sag and lose its reveals within a couple of seasons no matter how well the door was made.
Our technicians have up to 12 years of experience with cabinetry, and they’ve spent a lot of that time with KraftMaid product specifically – Vantage all-plywood boxes with full-overlay doors, Passage framed construction with raised-panel and shaker doors, and the full-access frameless boxes with dovetail drawer boxes. We know the difference between a maple, oak or cherry face and an MDF-core painted door, because each one ages differently in Spring Valley’s dry air and hard sun.
We use quality parts that fit KraftMaid equipment, and we match hardware spec – slide length, hinge overlay, finish – rather than dropping in mismatched aftermarket glides that throw the door reveal off. We can work with your warranty. We don’t claim factory training or certification. We’re an independent shop, and what we offer is hands-on familiarity and careful work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Spring Valley
Most of the KraftMaid service calls we get in Spring Valley trace back to one of five things. Here’s what each one is really telling you.
- Painted door fronts checking, crazing or peeling at the rail-and-stile joints. On KraftMaid Passage and Vantage cabinets, the paint on MDF or maple faces can crack where the door frame meets the panel. Dry desert air and years of sun exposure pull moisture out of the wood, and the joint moves. It’s a climate problem, not a paint problem, and it usually shows up on the sun-facing run first.
- Soft-close glides and hinges losing their dampening or sagging. Blum-style under-mount slides and concealed hinges are only as good as the box they’re mounted in. When a cabinet was set out of level on a sloped or uneven floor, the slide carries a load it wasn’t designed for and the dampener wears out early.
- Particleboard or MDF-core panel swelling near the sink base and dishwasher opening. A slow supply-line or disposal leak behind the sink base wicks into the panel edges, and the board swells and delaminates. By the time a homeowner sees it, the leak has usually been running quietly for a while.
- Framed Passage cabinets racking, or doors rubbing on one side. Wall cabinets hung to studs without shimming the box plumb against bowed drywall will twist. Once the frame racks, the doors don’t close clean, and the reveal goes uneven from top to bottom.
- Finish fading unevenly along a window-facing run. Spring Valley’s summer highs routinely climb past 105°F and the UV is relentless. Stained finishes can lighten unevenly where one cabinet run takes direct sun and the rest doesn’t, which reads as a mismatched kitchen even though the cabinetry is sound.
Here’s the thing an owner won’t find on a manufacturer page: painted-joint checking and MDF swelling are the two failures that most often decide repair-or-replace, and both are about moisture and level, not about the door. Fix the level and the joint, and the box usually has plenty of life left.
KraftMaid Parts & Our Repair-vs-Replace Approach

Our first question is always whether the box is sound. If a KraftMaid box has solid panels and the frame isn’t racked, refacing or re-fronting is usually the right call. You keep the layout and the box, and we replace the doors, drawer fronts and hardware to bring it back. We use genuine KraftMaid replacement doors, drawer fronts, hinges and touch-up finish where the line is still supported, and quality parts that fit when it isn’t. We don’t stock or order OEM parts as a rule – we source what the job needs.
Full replacement only makes sense when box panels are swollen past saving, or when the layout itself is the problem. A sink base that has delaminated is a box problem. A kitchen where the work triangle fights the doorway is a design problem. Both are real reasons to replace, and neither has anything to do with how the doors look.
Call (844) 560-4461 and we’ll tell you which side of that line your kitchen sits on. Estimates are free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We look at the doors, the joints, the sink base, the dishwasher opening and the level of the run before we quote anything. A rubbing door that looks like a hinge issue is often a box that was hung out of plumb.
- 2
Repair or install. We re-level and re-shim the cabinet run, correct or replace worn concealed hinges, refinish or re-front the affected doors, and match the hinge overlay and slide length to the original spec. New installs get the same treatment: level, plumb, shimmed to the actual wall.
- 3
Test. Every door and drawer gets opened and closed through its full travel. We check the reveal line top to bottom and confirm soft-close dampening works before we call it done.
- 4
Warranty. We document the parts we used and the work we did, so the record is there if you need it later. We can work with your insurer or your KraftMaid warranty on the parts that are covered.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Spring Valley

We handle KraftMaid base and wall cabinets, tall pantry and oven cabinets, drawer banks and the frameless full-access boxes with dovetail drawers. We install and reface kitchen runs, replace doors and drawer fronts, adjust and replace concealed hinges and under-mount slides, and refinish or touch up painted and stained finishes.
We also set countertops and backsplash around the cabinetry, install islands, and rework the layout when the boxes are fine but the plan isn’t. Most of the housing in Spring Valley went up during the 1990s and 2000s boom, so a lot of these kitchens are hitting the age where doors, hardware and sink bases need attention at the same time. That’s normal wear for the climate, not a failure of the cabinet.
We Also Service These Brands
KraftMaid is one line we work with regularly, but it isn’t the only one. We also service and install Kohler fixtures in the same kitchens and baths, GAF roofing on the same homes, PGT windows and doors, and Master Halco fencing. That range means you’re not handing a job to a single-brand shop that only knows one system. Choose your material, trust our installation.
FAQs – KraftMaid Construction Service in Spring Valley
No. We are an independent KraftMaid service provider, not a dealer and not authorized, sponsored or endorsed by KraftMaid. We work on their cabinetry as an independent remodeler and use quality parts that fit it. Call (844) 560-4461 for a free estimate.
Yes. We use genuine KraftMaid replacement doors, drawer fronts, hinges and touch-up finish where the line is still supported, and we match hardware spec – slide length, hinge overlay, finish – rather than dropping in mismatched aftermarket glides. A mismatched slide throws the door reveal off and you’ll see it every day. Call (844) 560-4461 to talk through your cabinets.
Hinge and hardware adjustments are usually a short visit. Re-fronting a kitchen run, replacing doors and drawer fronts, and refinishing take longer, and the timeline depends on whether the doors have to be ordered to match your line. We give you the schedule in the written estimate before anything starts. Call (844) 560-4461 for a free quote.
Base and wall cabinets, tall and pantry cabinets, drawer banks, frameless full-access boxes, and the doors, drawer fronts, hinges and slides that go with them. We handle installation, refacing, re-fronting and finish repair. Call (844) 560-4461 to confirm your setup.
Not from us. We’re careful to use parts that match the original spec and to document the work, and we can work with your KraftMaid warranty on the parts that are covered. Read your warranty terms for the details – they set what’s protected. Call (844) 560-4461 and we’ll walk you through it.
It depends on the scope. Cabinet installation typically runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and island installation $3,000 – $10,000. A small kitchen remodel lands around $9,000 – $20,000, and a full kitchen remodel $14,000 – $45,000. These are typical estimated ranges, and the written estimate sets the final price. Call (844) 560-4461 for an exact quote – estimates are free.
Book Your KraftMaid Service in Spring Valley, NV
Whether your KraftMaid doors are checking at the joints, your soft-close drawers have gone slack, or you’re planning a fresh kitchen layout, we can help. Call (844) 560-4461. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets your price.
Written by the team at Construction Spring Valley.












